This width, 35mm, is the most common size for jeans with 1 1/2". Belts of 1¾" are also popular for jeans.
All of our tooled belts are made from 3.2-3.6mm hide, naturally tanned using traditional tanning methods. The belts are all individually hand tooled, which gives a clear and long lasting design.
Up to 8 different tools can be used in any one belt. With over a 100 stamping tools in the workshop, we produce an extremely wide range of hand tooled belts. Every belt that uses more than 1 tool in the design contains a deliberate mistake to authenticate its individuality; a signature.
After tooling the belts are stained. The final look is obtained by applying up to 5 coats of stain, plus our own mixture of sealant/finisher (magic potion) which enhances the tooling and brings out the natural grain of the leather.
Handmade Brown-Dark Green Belt | Hand Tooled 35mm | XT35-030 | Beara Belts
All belts receive a coat of leather dressing before leaving the workshop, it is good for the leather to keep nourishing it with Ko Cho Line or Saddle Soap every few month. You can find these product in any equestrian shops.
Please look at the illustration to see how to measure your belt size. (different than your waist size!)
Measure from the end of the buckle to the hole you use the most (see pictures).
If the belt is a gift for someone, and you won't have the opportunity to sneackily measure the old belt of the person, let me know in the "Size section" than you couldn't get the "Belt Size". I will take that in consideration when punching the holes.
I will use the belt size you provide me as the middle hole for the newly ordered belt.